F3393 GLEASON 645 G PLETE HYPOID SPIRAL BEVEL GEAR GENERATOR

Category:

Description

Serial No:       770502

Model:            645 G Plete

MFD:  1980

 

Capacities:

Extreme Ratios                                   10:1

Root Angle Range:                 -8° to 90°

Gear Diameter Maximum:

Outer Cone                  Spiral               Cutter

Distance                      Angle              Diameter

361.2mm                     29.75°  304.8mm

356.9mm                     30°                   406.4mm

378mm                        35°                   457.2mm

Maximum Radial Settings:                                                                 266.7mm

Pitch Coarsest:                                                                                    1.5 DP / 16.9 MOD

Face Width Maximum:                                                                       116.8mm

Full Depth:                                                                                          31.8mm

Index Range:                                                                                       5 – 80 Inclusive

Work Spindle:

Diameter of Taper Hole At Large End:                                              152.4mm

Taper Per Foot:                                                                                   19.05mm

Depth of Taper:                                                                                   152.4mm

Diameter of Hole Through Spindle:                                                   127mm

Cutter Diameters:                                                                                9, 12, 16, 18”

Work Head Settings:

Offset Above Centre Maximum                                                          114.3mm

Offset Below Centre Maximum:                                                         114.3mm

Machine Centre to Nose of Spindle Maximum:                                 596.9mm

Cutter Speeds:                                                                                    19 – 167 Rpm Stepless

Feeds Infinitely Variable Per Tooth:                                                  7 Seconds Minimum

 

Electrics:         415v, 3ph, 50 Cycles

Cutter Motor:  15 Hp

 

Approximate Dimensions:    3556 x 2032 x 2100mm

Approximate Weight:           26,490kg

Description

Serial No:       770502

Model:            645 G Plete

MFD:  1980

 

Capacities:

Extreme Ratios                                   10:1

Root Angle Range:                 -8° to 90°

Gear Diameter Maximum:

Outer Cone                  Spiral               Cutter

Distance                      Angle              Diameter

361.2mm                     29.75°  304.8mm

356.9mm                     30°                   406.4mm

378mm                        35°                   457.2mm

Maximum Radial Settings:                                                                 266.7mm

Pitch Coarsest:                                                                                    1.5 DP / 16.9 MOD

Face Width Maximum:                                                                       116.8mm

Full Depth:                                                                                          31.8mm

Index Range:                                                                                       5 – 80 Inclusive

Work Spindle:

Diameter of Taper Hole At Large End:                                              152.4mm

Taper Per Foot:                                                                                   19.05mm

Depth of Taper:                                                                                   152.4mm

Diameter of Hole Through Spindle:                                                   127mm

Cutter Diameters:                                                                                9, 12, 16, 18”

Work Head Settings:

Offset Above Centre Maximum                                                          114.3mm

Offset Below Centre Maximum:                                                         114.3mm

Machine Centre to Nose of Spindle Maximum:                                 596.9mm

Cutter Speeds:                                                                                    19 – 167 Rpm Stepless

Feeds Infinitely Variable Per Tooth:                                                  7 Seconds Minimum

 

Electrics:         415v, 3ph, 50 Cycles

Cutter Motor:  15 Hp

 

Approximate Dimensions:    3556 x 2032 x 2100mm

Approximate Weight:           26,490kg

Menu
Basket

No products in the basket.